I had a bolt break in my steering mechanism & it caused my steering to fail.

I tried many things first including PB Blaster, but nothing would budge the bolt until the heat hit it.

.

Then follow up with a 1/2-in. Instead of trying to get the bolt to come oh he drilled a new hole in the same spot.

.

.

. Be careful not to damage the ball joint boot seal. Remove and DISCARD both front lower control arm to subframe mounting bolts (1).

.

The pin has a groove on the side that the pinch bolt passes through. Separate the ball joint from the knuckle. Mar 18, 2015 · it was very seized indeed, i drilled about half way through the bolt and used a silver steel drift and a sledge hammer to knock it out.

This. Sold In Quantity: 1.

Its frozen in from the top and bottom.

.

Installing a ball joint with a pinch bolt. Buy Now!New Ball Joint Set from 1AAuto.

. lbs.

When installing the steering knuckle, take care to make sure it is centered with the recessed area of the ball joint.
.
I'd guess the bolt broke when they removed it and seeing there were 3 threads left, someone said Eff-it and it was put on and somewhat tightened.

Well today it happened.

hole most of the way through all of the rivets.

To learn more about servicing ball joints and steering and suspension repairs, visit Garage Gurus fmgaragegurus. -Buy a new/used spindle and new ball joint and chuck the old one. If it breaks, you can drill it out, flatten the back side of the knuckle, and just use a nut and bolt.

Learn how to remove a ball joint pinch bolt in order to replace a CV jo. Its frozen in from the top and bottom. To learn more about servicing ball joints and steering and suspension repairs, visit Garage Gurus fmgaragegurus. Please Like, Comment, and Share. make yourself comfy, you do not want to screw up. .

Instead of trying to get the bolt to come oh he drilled a new hole in the same spot.

. BALL JOINT PINCH BOLTS.

It's a Minnesota car, so it is rusted over and a simple twist of the.

5 rs and his brother broke the pinch bolt trying to replace the lower ball joint.

Apr 17, 2012 · Try cutting the bolt through the slit to shorten it (I don't know how wide it is from memory).

.

.